NEWS, EVENTS and RESEARCH

  • Shaken and stirred: Scientists capture the deformation effect of shock waves on a material

    06 21, 2019

    (Tokyo, June 21) Understanding how shock waves affect structures is crucial for advancements in material science research, including safety protocols and novel surface modifications. Using X-ray diffraction probes, scientists at the Institute of Materials Structure Science of KEK (High Energy Accelerator Research Organization), Tokyo Institute of Technology, Kumamoto University, and University of Tsukuba studied the deformation of polycrystalline aluminum foil when subjected to a laser-driven shock wave.

    The foundations of engineering lie in understanding and manipulating the structure of materials to harness their properties in creative ways. Interactions between materials take place via the exchange of forces so predicting a material’s ability to withstand a force and how it propagates is central to developing structures with enhanced strength.

    If an instantaneous strong force acting on a material results in a shock wave, the atoms may become displaced or dislocated. Like a rubber band, if the external force is not too significant, the internal forces can resist and the material can return to its original state (elastic deformation). But beyond a certain limit, the force may result in permanent damage or even structural failure (plastic deformation) of the material.

    Unit cells are the smallest regularly repeating three dimensional atomic structure that reflects the overall symmetry of a crystal, and studying their displacement can provide rich insights. However, observing processes at the atomic scale is very difficult. This is where x-ray diffraction comes to the rescue. Envision a camera that allows you to capture events taking place at the atomic scale. When an x-ray encounters an atom it gets absorbed and then re-emitted by the atom. This results in the wave being scattered or diffracted in an orderly fashion, owing to the orderly arrangement of atoms in the crystal. Depending on the size, spatial arrangement, and distance between the atoms, the wave is scattered in different directions with different intensity. Thus, the atomic structure is captured as signals, like a photograph of the crystal during and after the shock wave passes. This can be used to decode crystal deformation.

    Motivated by this, researchers conducted an experiment to observe the deformation process of polycrystalline aluminum foil when subjected to a laser-driven shock wave. This disturbance was then captured as diffraction spots of an x-ray beam which could be simultaneously compared to the diffraction pattern of the pre-shock crystal (Fig. 1). They found that large grains of aluminum were rotated, compressed elastically, and reduced in size along the wave direction. As the wave propagated deeper into the sample, the diffraction spots smoothed and broadened, and the original diffraction spots began to disappear, replaced by a new set of spots (Fig. 2). “We observed grain refinement and structural changes of the polycrystalline metal, which increased with the propagation of the laser-driven shock wave. This, in turn, enabled the study of microstructural deformation in plastic shock flows from the atomic to the mesoscale level,” stated Dr. Kohei Ichiyanagi of High Energy Accelerator Research Organization and Jichi Medical University.

    Contemporary research of post-shock structural changes of materials often fails to highlight the process of wave dissipation and the distribution of defects. This research changes the status quo by providing a method to observe grain refinement and structural changes, including surface hardness and modification, of polycrystalline metal during shock wave loading. Optimistic about the potential of this research, Professor Kazutaka G. Nakamura of the Tokyo Institute of Technology said, “Our technique will be valuable for revealing mechanisms of microstructural change for various alloys and ceramics based on dynamic processes.”

    Surely, this goes to show the creative ways we can expand the reaches of what we are able to see: this time, it’s how x-rays can be used to capture how particles are shaken and stirred!

    Reference

    Authors

    Kouhei Ichiyanagi1,2, Sota Takagi2,3, Nobuaki Kawai4, Ryo Fukaya2, Shunsuke Nozawa2, Kazutaka G. Nakamura5, Klaus-Dieter Liss6,7, Masao Kimura2 & Shin-ichi Adachi2

    Title of original paper

    Microstructural deformation process of shock-compressed polycrystalline aluminum

    Journal

    Scientific Reports

    DOI

    https://doi.org/10.1038/s41598-019-43876-2

    Affiliations

    1Division of Biophysics, Department of Physiology, Jichi Medical University Japan.

    2Photon Factory, Institute of Materials Structure Science, High Energy Accelerator Research Organization, Japan.

    3Division of Earth Evolution Science, Graduate School of Life and Environmental Sciences, University of Tsukuba, Japan.

    4Institute of Pulsed Power Science, Kumamoto University, Japan.

    5Laboratory for Materials and Structures, Tokyo Institute of Technology, Japan.

    6 Materials and Engineering Science Program, Guangdong Technion-Israel Institute of Technology, China.

    7Technion-Israel Institute of Technology, Israel.

    *Corresponding author’s email: kouhei.ichiyanagi#@#kek.jp, nakamura.k.ai#@#m.titech.ac.jp
    (Remove "#" from the above e-mail address before sending mail.)

    Figure 1. Diffraction patterns of deformed crystals

    Aluminum foil irradiated by a laser-driven shock wave is followed by an X-ray pulse to read the diffraction pattern of the crystal structure.

    Figure 2. Pre and post shock wave diffraction pattern of crystals

    Diffraction images of polycrystalline aluminum foil before laser irradiation (left image) and
    after shock wave propagation (right image). The laser-induced shock wave pattern is
    smoothed due to plastic deformation.

    Contacts

    Hajime Hikino

    Head, Public Relations Office

    High Energy Accelerator Research Organization (KEK)

    press#@#mail.kek.jp
    (Remove "#" from the above e-mail address before sending mail.)

    +81-29-879-6047

    Takashi Ogawa

    Research Support Section

    Jichi Medical University

    shien#@#jichi.ac.jp
    (Remove "#" from the above e-mail address before sending mail.)

    +81-285-58-7550

    Jason Sanderson & Naoko Fukuda

    University Research Administration (URA) Office

    Kumamoto University

    research-coordinator#@#jimu.kumamoto-u.ac.jp
    (Remove "#" from the above e-mail address before sending mail.)

    +81-90-342-3307

    Emiko Kawaguchi

    Public Relations Section,

    Tokyo Institute of Technology

    media#@#jim.titech.ac.jp
    (Remove "#" from the above e-mail address before sending mail.)

    +81-3-5734-2975

    Naoko Yamashina

    Office of Public Relations

    University of Tsukuba

    kohositu#@#un.tsukuba.ac.jp
    (Remove "#" from the above e-mail address before sending mail.)

    +81-29-853-2039

    About High Energy Accelerator Research Organization (KEK)

    KEK was established to promote various types of researches as a center of excellence for overall development of Japan’s accelerator science (particle and nuclear research using high energy accelerators, research on the structure/function of matter including living organisms, research on improving the accelerator performance, and related basic technologies). As the Inter-University Research Institute Corporation, KEK provides researchers across the country and abroad with opportunities for research. With the Tsukuba and Tokai campuses as centers for excellence, KEK joins international collaboration experiments and developments. In addition, KEK, as a basic research organization under Graduate University for Advanced Studies, fosters scientists who will contribute to the promotion of accelerator science and advanced research fields.

    https://www.kek.jp/en/

    About Kumamoto University

    Kumamoto University (KU), in its current form, was established on the 31st of May 1949, but its origins can be traced as far back as the mid-18th century. Now it is a globally active research university with strong roots in the local community. With seven faculties and eleven graduate schools, KU aims to cultivate creative people and provide them with the tools to thrive in the information age. KU’s research institutions and organizations strive to protect humankind’s cultural heritage, produce cutting-edge academic research, and promote sustainable development to help create a better future for the generations to come.

    https://ewww.kumamoto-u.ac.jp/en/

    About Tokyo Institute of Technology

    Tokyo Tech stands at the forefront of research and higher education as the leading university for science and technology in Japan. Tokyo Tech researchers excel in fields ranging from materials science to biology, computer science, and physics. Founded in 1881, Tokyo Tech hosts over 10,000 undergraduate and graduate students per year, who develop into scientific leaders and some of the most sought-after engineers in industry. Embodying the Japanese philosophy of “monotsukuri,” meaning “technical ingenuity and innovation,” the Tokyo Tech community strives to contribute to society through high-impact research.

    https://www.titech.ac.jp/english/

    About University of Tsukuba

    The University of Tsukuba aims to establish free exchange and close relationships in both basic and applied sciences with educational and research organizations and academic communities in Japan and overseas. While developing these relationships, we intend to pursue education and research to cultivate men and women with creative intelligence and rich human qualities.

    https://www.tsukuba.ac.jp/en/

    Copyright © 2016 University of Tsukuba All Rights Reserved.

    1-1-1 Tennodai, Tsukuba, Ibaraki 305-8577 Japan